How To's Advice for Fridges and Freezers

How to install and wire a 12V Bushman Fridge

12V fridge compressors have a very specific operating range. The Secop Danfoss compressors we use require the following minimum voltage for the compressor to attempt start up (cut-in) or to continue running (avoid cut-out). There is also a maximum allowed voltage for the compressor to operate.

How to install your Bushman fridge for optimal ventilation and air flow

To keep your fridge running efficiently, you need to create an environment that allows for maximum air flow and ventilation to the compressor area.

How to install your DCL fridge the right way

How to install your Bushman DCL fridge

When it comes to mounting your DCL series upright fridge, there are two different ways you can go about it. Here we will cover off the 2 main options.

How to pack your Bushman upright fridge for efficiency

The way you pack your upright Bushman fridge will impact how efficiently it runs.

How to swap the way your DC-X Series fridge door opens

Your Bushman DCX series fridge comes with the door hinges fitted to the right hand side from factory. You can swap these to the left hand side if that suits your set up better.

How to use the manual thermostat on your Bushman upright fridge

Did you know that you can optimize your fridge’s performance just by using the thermostat in your Bushman fridge? Here’s how to ensure your fridge is running efficiently.

How to make sure your Bushman DC-L Series upright fridge closes properly

It’s a good idea to check the rubber door seals on your upright fridge occasionally, especially if your fridge is installed in a vehicle or mobile home. We recommend a quick visual inspection of your door seals and alignment after your first trip with your new fridge, and once a year.

How to swap the door hinges on your Bushman DC-L Series fridge

Your Bushman DC-L Series fridge comes with the door hinges fitted to the right hand side from the factory. You can swap these to the left hand side. Please follow these instructions carefully.

How to make sure your DC-X Series fridge closes properly

It’s a good idea to check the rubber door seals on your upright fridge occasionally, especially if your fridge is installed in a vehicle or mobile home. We recommend a quick visual inspection of your door seals and alignment after your first trip with your new fridge, and then once a year after that.

How To’s: Guides for Fridges and Freezers